14 | SAMLEX AMERICA INC.
SAMLEX AMERICA INC. | 15
APPENDIX A
SECtION 4 |
Parameter Setup
4.2.1 PARAMeteR SetUP PRoCeDURe – GeneRAL
Please refer to Fig 4.3 below.
The
enter
key is used to enter Parameter Setup Mode from any Operating Mode Screen in Fig 3.2.
Example in Fig 4.3 below starts with Inverting Mode Screen (Operating Mode Group 2, Screen 1
in Fig 3.2). After the
enter
key is pressed, the
Up/Down
keys are used to navigate to the different
Parameter Groups (Groups 1 to 7). When the Group for the desired setting is displayed on the LCD,
the
enter
Key is used again to select this Group. The
Up
and
Down
Keys are used to move to the
individual parameters within the Group.
Pressing the
Back
Key will exit the specific Parameter, or Group backing to previous level.
There is a 30 second timeout for setting parameters; after 30 seconds the Setting Mode will
be cancelled and the EVO-RC will revert to the mode associated with current operation.
It is highly recommended to set the EVO
TM
Date and Time (Parameter Group 6) as this value is
used to record data logging files. (Refer to Section 4.9 for Date and Time set up).
Group 1
Any Operationg Mode
Screen from Fig 3.2
Parameter Setup Screen
(eg. BULK CURRENT)
“Select Group” Menu Map
SELECT GROUP
CHARGE CURVE
BULK CURRENT
40 A
INVERTING
OUTPUT
230.00V
SELECT GROUP
STOP SD CARD
Group 2
SELECT GROUP
INPUT SETTING
Group 3
SELECT GROUP
INPUT LOW LIMIT
Group 4
SELECT GROUP
INPUT HIGH LIMIT
Group 5
SELECT GROUP
OTHER FUNCTION
Group 6
Group 7
(See Note 3)
SELECT GROUP
TIME SETTING
ò
ò
ò
ò
ò
ò
ò
ò
ò
ò
ò
ò
ò
ò
ò
ò
Press Enter Key
Press Back Key
ò
ò
Press Up Key: Move down to higher Group No. (See note 1)
Press Down Key: Move up to lower Group No. (See Note 2)
òò
Fig 4.3 "Select Group" Menu Map and example for Setting Bulk Current
noteS FoR FiG 4.3:
1. Group Up is shown with downward pointer
because Group Nos. in this Menu Map
increase in the downward direction
2. Group Down is shown with upward pointer
because Group Nos. in this Menu Map de-
crease in the upward direction
3. Group 7 screen will be shown only when SD card is inserted.
