H14
www.samon.nl - [email protected]
V2-2016-ENG
20
6.4
Tensioning the conveyor belt
If the inspection reveals that the conveyor belt needs to be tensioned then the belt can be tensioned as
follows.
The adjustment bolts of the conveyor belt are
located on each side of the belt.
Loosen the locking nut (A).
Adjust the tension by turning the adjustment bolt
(B).
Tighten the locking nut (A) securely.
6.5
Adjusting the height of the drawbar
The height of the drawbar needs to be adjusted
correctly relative to the tractor if the SAMON Onion
Loader is to be steered optimally.
Loosen the locking nut (A).
Adjust the height of the drawbar using adjusting nut
(B).
Tighten the locking nut (A) securely.
6.6
Adjusting the tow-ring
When the height of the drawbar has been adjusted
then the tow-ring will also need to be adjusted to
make sure than it is precisely horizontal relative to
the tractor.
Loosen locking nuts (A) and (B) and adjust the angle
of the tow-ring.
Tighten the locking nuts securely.
Summary of Contents for SU1L
Page 20: ...H18 www samon nl info samon nl V2 2016 ENG 20 9 2 Hydraulic diagram of hydraulic cylinders...
Page 21: ...H19 www samon nl info samon nl V2 2016 ENG 20 9 3 Electric diagram for remote control...
Page 22: ...H20 www samon nl info samon nl V2 2016 ENG 20 9 4 Electric diagram for main cabinet...
Page 26: ...Spare Parts List...