STAR 3001W GUN
L1
L1
L2
L3
L3
Ed.
010 - 07/2020
www.larius.eu
33
During cleaning of all the gun components and, in particular, of
the barrel, it is recommended NOT to dip them completely in the
solvent. Use a soft brush moistened with cleaning liquid. At the
end, carefully wipe with a soft cloth. NEVER use abrasive tools.
NOTE
• The barrel is now completely disassembled. Verify that the
internal spring contact (
L1
) is intact and clean.
• Verify that the internal gasket
(
L2
) is intact and clean. Replace
it, if necessary.
L.p - VERIFY RHEOPHORES CLEANING
This procedure shall be carried out for guns with:
LOW PRESSURE
CONE TIP
AIRLESS
FAN TIP
AIR ASSISTED AIRLESS
CONE TIP
LOW PRESSURE
FAN TIP
CLEANER
Liquid Cleaner
Grease
Clean
AIR ASSISTED AIRLESS
FAN TIP
• Check that the two rheophores
(
L3
) are duly cleaned.
