background image

Copyright © 2005 by Hydro-Force

LIMITED WARRANTY

Your Omni-Pro Sprayer is designed to give you years of reliable service. If 
a problem should arise, use the troubleshooting section in the operation 
manual to diagnose and correct the problem if possible. 

If you are unable to determine the cause or solution to the problem, 
contact your distributor or Hydro-Force for assistance.

Hydro-Force warrants the Omni-Pro Sprayer to be free of defects in 
material and workmanship. This warranty shall extend for one year from 
the date of purchase. 

During the warranty period, Hydro-Force will, at its option, repair or 
replace components which prove to be defective. This warranty does not 
provide for replacement of complete units due to defective components. 
Any costs for transportation or related service labor are not covered in this 
warranty. Replacement parts are warranted only for the remainder of the 
original warranty period.

This warranty shall not apply to defects resulting from improper operation, 
lack of maintenance, unauthorized modification, chemical incompatibility, 
misuse, abuse, or exposure to freezing temperature conditions. It does 
not cover normal wear items such as o-rings, valve seals, pump seals, 
hoses, jets, cords, batteries, chemical bottles, or other items which require 
replacement as a result of ordinary usage.

To obtain warranty service for the Omni-Pro Sprayer, contact your 
distributor or Hydro-Force. If the sprayer must be returned to Hydro-
Force or an authorized service center, the purchaser shall prepay shipping 
charges for products returned for warranty service. All returns must have 
a Return Authorization number, issued by Hydro-Force, clearly marked on 
the exterior of the package. No returned items will be accepted by Hydro-
Force without prior authorization.

Hydro-Force makes no other warranty, either expressed or implied, with 
respect to this product.

The remedies provided herein are the purchaser’s sole and exclusive 
remedies. In no event shall Hydro-Force be liable for any direct, indirect, 
special, incidental, or consequential damages.

This warranty gives you specific legal rights. You may also have other rights 
which vary from jurisdiction to jurisdiction.

12 Volt Sprayer

Summary of Contents for Omni-Pro









Reviews: