STAR 3001W GUN
L1
L2
L6
L11
L9
L3
L4
L5
L3
L4
L8
L6
L7
Ed.
010 - 07/2020
www.larius.eu
27
L.e - REMOVE THE NEEDLE SUPPORT
•
Insert a M5 screw (
L1
) inside the needle support (
L2
) and use
it to remove the needle support (
L2
).
•
Check the wear of the two gaskets (
L3
) and (
L4
) of the needle
support. Replace them, if necessary. Worn gaskets may cause
the overflow of the product from the inspection door (
L5
) on
the gun barrel.
•
Check the wear of the gaskets inside the needle support and,
in particular, check the lip gaskets (
L7
).
•
Check that the seal (
L8
) is intact. Replace it, if necessary.
•
Check that the rear contacts (
L9
) are clean.
This procedure shall be carried out for guns with:
LOW PRESSURE
CONE TIP
AIRLESS
FAN TIP
AIR ASSISTED AIRLESS
FAN TIP
AIR ASSISTED AIRLESS
CONE TIP
LOW PRESSURE
FAN TIP
AIRLESS
CONE TIP
CLEANER
Liquid Cleaner
Clean
