STAR 3001W GUN
Ed.
010 - 07/2020
www.larius.eu
8
WARNINGS
The table below provides the meaning of the symbols used in this manual in relation to using, earthing,
operating, maintaining, and repairing of this equipment.
Read this operator’s manual carefully before using the equipment.
An improper use of this machine can cause injuries to people or things.
Do not use this machine when under the influence of drugs or alcohol.
Do not modify the equipment under any circumstances.
Use products and solvents that are compatible with the various parts of the equipment, and read the manufacturer’s
warnings carefully.
See the Technical Details for the equipment given in the Manual.
Check the equipment for worn parts once a day. If any worn parts are found, replace them using ONLY original
spare parts.
Keep children and animals away from work area.
Comply with all safety standards.
It indicates an accident risk or serious damage to equipment if this warning is not followed.
Grant a suitable air fresh ventilation in order to prevent any accumulation of toxic or flammable vapors during
spraying, washing or cleaning of the gun.
If the ventilation system is not working, interrupt the air supply to the gun to prevent operation.
It indicates important recommendations about disposal and recycling process of products in accordance with the
environmental regulations.
Report any risk of chemical reaction or explosion if this warning has not been given.
There is a risk of injury or serious lesion related to contact with the jet from the spray gun. If this should occur,
IMMEDIATELY contact a doctor, indicating the type of product injected.
Do not spray before the guard has been placed over the nozzle and the trigger on the spray gun.
Do not put your fingers in the spray gun nozzle.
Once work has been completed, before carrying out any maintenance, complete the decompression procedure
explained in this manual.
It reports any danger of electric shock if the warning and presence of live electrical parts has not been indicated.
Store in a dry place and do not expose to the rain.
Check that the cables are in good condition.
Switch off the equipment and discharge any electricity before cleaning or maintaining the equipment.
It indicates the presence of any clamps with earth cables.
Use ONLY 3-wire extension cords and grounded electrical outlets.
Before starting work make sure that the electrical system is earthed and that it complies with safety standards.
Provide a suitable grounding for all the equipment, personnel and conductive tools within the working area.
FIRE AND EXPLOSION HAZARD
Solvent and paint fumes in working area can ignite or explode.
To help prevent fire and explosion:
•
Use equipment ONLY in well ventilated area.
•
Eliminate all ignition sources, such as pilot lights, cigarettes and plastic drop cloths (potential static arc).
•
Ground equipment and conductive objects.
•
Use only grounded airless conductive hoses.
•
Do not use trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing
such solvents in pressurized aluminium equipment. Such use can cause serious chemical reaction and explosion.
•
Never clean when the electrostatic parts of the gun are ON. Turn on the electrostatic parts of the gun only after
having removed any solvent from the circuit.
•
Use cleaning solvents with a flash point as high as possible, preferably higher than ambient temperature
If electrical shocks or discharges are encountered,
immediately stop
the operation of the equipment.
Keep a fire extinguisher at hand close to the working area.
