JOLLY
www.larius.com
10
REV.
01 - 09/2020 - Cod. 150165
Connecting the equipment to the power supply
•
Check that the switch (
H5)
is on the
“
OFF
”
(0)
position before
connecting the cable to the mains.
•
Place the pressure control knob (
H6
) on the
“
MIN
”
position
(turn counterclockwise)
.
• Lift the suction group and dip it into the tank containing the
washing liquid.
•
Press the equipment main switch (
H5
) on pos.
“ON”
(I)
.
•
Open the recirculation-safety valve (
H7
).
Washing of the new equipment
• The equipment has already been adjusted at our factory with
light mineral oil left inside the pumping group as protection.
Therefore, wash with diluent before sucking the product.
• Ensure the gun (
H3
) is without nozzle.
OFF
ON
OPEN
It re-circulates back into
the tank without spraying
CLOSED
It sprays out of
the spray gun
Fig. 4H
Fig. 5H
Fig. 6H
Fig. 7H
Fig. 8H
H7
H5
H6
H5
H6
H3
H7
H7
