www.larius.com
13
GHIBLI 10:1
ED.
05 - 10/2020 - Cod. 150154
Q4
Q1
Q2
Q3
NOTE
ATTENTION!
FOR THE
REASSEMBLING OF THE
GASKETS, RESPECT THE
ORDER AS SHOWN IN
THE DRAWING.
• Extract the piston rod from the housing.
• Unscrew the packing nut (
Q4
) (
use a metal rod with an internal
diameter of 6 mm
).
• Remove the gaskets and packing glands.
• For the correct reassembling of the gaskets see the illustration
below and the exploded view on page 16.
Tighten the packing nut only after inserting again
the piston rod into the housing (
it is suggested
to insert the piston rod from the top to avoid to
ruin the gaskets
).
