Sammode SA
Notice BOYLE rév D
24, rue des Amandiers – F 75020 Paris
8/12
Décembre 2015
EN
CONFORMITY DECLARATION
I undersigned Rudy Bigand, Technical Director of the company Sammode SA, located at 24 rue des Amandiers 75020
PARIS, declares that following products (group IIC category 3G and group IIIC category 2D) :
-
LLn 12H
,
BOYLE 12H
/ Classe 1 / 230 Volts
/ 50/60/0Hz
-
LLn 13H
,
BOYLE 13H /
Classe 1 / 230 Volts
/ 50/60/0Hz
-
LLn 15H
,
BOYLE 15H
/ Classe 1 / 230 Volts
/ 50/60/0Hz
-
LLn 23H
,
BOYLE 23H
/ Classe 1 / 230 Volts
/ 50/60/0Hz
-
LLn 25H
,
BOYLE 25H
/ Classe 1 / 230 Volts
/ 50/60/0Hz
meet the following regulatory requirements:
ElectroMagnetic compatibility Directive (EMC) 201/30/UE
To ensure compliance the product meets specific standards lighting fixtures: EN 55015 relating to radio disturbance
and EN 61547 on immunity. Moreover, the active components are themselves in conformity with the EMC Directive
Low Voltage Directive (LVD) 2006/95/EC of 12 December 2006
To ensure compliance the product meets the standards of fixtures series EN 60598, the active components are
themselves consistent with the LVD.
All equipment leaving the assembly shall be test operation and safety, especially dielectric and earthing continuity.
Decree No. 2005-829 of 22 July 2005
Directives 2011/65/UE (on the restrictions on the use of certain hazardous substances in Electrical and Electronic
Equipment) Directive 2012/19/UE and (Known as WEEE, Waste Electrical and Electronic Equipment).
ATEX Directive 94/9/EC of 23 mars 1994
To ensure compliance the product meets the followings standards:
-
EN 60079-0:2012/A11 :2013 (Explosive Atmospheres - Equipment – General requirements),
-
EN 60079-15 :2010 (Electrical apparatus for explosive gas atmospheres – Part 15: Construction, test and
marking of type of protection "n" electrical apparatus)
-
EN 60079-31 : 2014 (Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t")
-
The EC-type examination certificates INERIS
15ATEX0005X
and INERIS 15ATEX3002X delivered by the notified
body INERIS, 0080, F-60 550 Verneuil-en-Halatte.
Paris 18 December 2015
RUDY BIGAND
Technical Director
The notified body involved in the production control stage, or the product itself is : INERIS, n° 0080, F-60550 Verneuil-
en-Halatte.
