Samlexpower SMC-10, Owner'S Manual

Page: 3 / 24

2 | SAMLEX AMERICA INC. SAMLEX AMERICA INC. | 3
IMPORTANT SAFETY INSTRUCTIONS
PLeASe ReAD theSe inStRUctionS coMPLeteLy
beFoRe inStALLAtion!
1. AboUt thiS MAnUAL
These operating instructions are part of the product. read these operating instructions
carefully before use, keep them over the entire lifetime of the product, and pass them on
to any future owner or user of this product.
This manual describes the installation, function, operation and maintenance of the solar
charge controller. These operating instructions are intended for end customers. A techni-
cal expert must be consulted in cases of uncertainty.
2. SAFety
The SMC-10 solar charge controller may only be used in PV systems for charging and con-
trolling lead-acid batteries in accordance with this operating manual and the charging
specifications of the battery manufacturer.
The solar charge controller may only be connected to the local loads and the battery by
trained personnel and in accordance with the applicable regulations. follow the installa-
tion and operating instructions for all components of the PV system.
No energy source other than a solar generator may be connected to the solar charge
controller. follow the general and national safety and accident prevention regulations.
Keep children away from PV systems. Do not use the solar charge controller in dusty
environments, in the vicinity of solvents or where inflammable gases and vapours can oc-
cur. No open fires, flames or sparks in the vicinity of the batteries. ensure that the room is
adequately ventilated. Check the charging process regularly.
follow the charging instructions of the battery manufacturer. battery Acid splashes
on skin or clothing should be immediately rinsed with plenty of water. Seek medical
advice. Do not operate the solar charge controller when it does not appear to function
at all, or if the solar charge controller or connected cables are visibly damaged or loose.
In these cases immediately remove the solar charge controller from the solar modules
and battery.
3. FUnctionS
The solar charge controller monitors the state of charge of the battery bank, controls the
charging process, controls the connection/disconnection of loads. This optimises battery
use and significantly extends its service life.