Samlex Europe WSC-1250Li, Manual, Page: 15 / 39

15
ENG
3 Applications and Descriptions
An optional remote control (Figure 10 Remote Controller RC-600, Page. 7) can be obtained in
order to provide remote access to the charger.
4 Introduction of the unit variants
The 3 or 4-stage (depending on the charge curve) battery charger can deliver different unit
variants. It can charge batteries up to the specified battery capacity as indicated in the
specification section. Regarding the identification of the specification of your unit, please see
the model number on the type plate.
Front view Model-No.:
WSC-1250Li / WSC-1280Li / WSC-12120Li / WSC-2425Li / WSC-2440Li and WSC-2460Li
(See Figure 1 WSC-1250Li / WSC-1280Li / WSC-12120Li / WSC-2425Li / WSC-2440Li /
WSC-2460Li Charger Front View, Page. 2)
No. Description
1. "TEMP" connection for temperature sensor (accessory TF-100)
2. "REMOTE" connection for remote control (accessory RC-600)
3. Switch field S1 for the selection of the charging voltage, charging time limitation
and power supply mode (see also Figure 8 Switch, Page. 6)
4. "STATUS" LED
5. "E.Q." equalization LED
6. On/Off switch S2 for half power mode
7. Switch S3 for equalization on only
8. "+" (plus) DC output terminal for the supply battery
9. "-" (minus) DC output terminal for the supply battery
10. Connection for AC input 100~240 volts voltage
11. Plug holder
Rear view
(See Figure 2 Charger Rear View, Page. 2)
No. Description
1. Ventilation outlet
2. Power switch