20
Member of Exel group
DRT6454
B - 2023/06
5. Start-up
5.1. Tools
Necessary tools and accessories:
he tools listed below are recommended for installation and maintenance of the equipment.
• Flat screwdrivers
• Phillips screwdrivers.
• Allen wrenches.
• Flat wrenches.
• Pipe wrenches.
• Multi-grip and cutting pliers.
• Cutting pliers or tube cutter.
5.2. Installation
For optimum efficiency, the
Inotransfer
transfer pump must be installed as close as possible to the container to be
drawn from and out of the explosive area
5.2.1. Electrical connections
The electrical connection is made by the power cable coming out through a cable gland located at the bottom of the
cabinet.
5.2.2. Ground connection
Before starting up the Inotransfer, it is essential to connect it to an earth terminal with the
cable supplied with the cart.
From an earth terminal of the installation, connect the
green/yellow protective earth cable to the brass screw (
A
)
located on the cart of the
Inotransfer
.
A
