15
Member of Exel group
DRT7161
B - 2023/10
3. Characteristics
3.1. General characteristics
The structure of the cart makes it possible to place:
• In the
NDT version
: a pressure tank that can hold approximately 15 liters of fluidised powder (i.e. approximate-
ly 5 to 7 kg of powder depending on density).
• In
HF version
: a pressure tank that can contain about 24 liters of fluidised powder (i.e. about 10 to 12 kg of
powder depending on density).
3.2. Air compressed quality
Characteristics of compressed air supply according to the standard NF ISO 8573-1:
*: Values are given for a temperature of 20 °C (68 °F) at an atmospheric pressure of 1 013 mbar
The filter installed on the
Inocart NDT/HF
is used to guarantee the correct operation of the equipment, in case of
accidental non-compliance with the network compressed air filtration recommendations.
(*) A pressure higher than 8 bar can cause malfunctions.
Total equipment consumption:
4. Operation
The
NDT and HF carts
mainly consist of a cart, an
Inobox NF
module, an
NDT or HF pressure tank
depending on
the version and an
Inogun M
gun.
The
Inogun M
gun allows to:
• spray powder paint on an earthed part.
• electrically charge the powder so that it adheres to the part to be powdered.
The electric charge of the powder is ensured by an electrode located at the end of the nozzle. This electrode is
brought to high voltage by a high voltage unit integrated in the gun barrel. The high-voltage unit is even supplied
with low-voltage current by the
Inobox NF
control module.
Inocart NDT
Inocart HF
Dimensions of the cart (H x W x D)
1230 x 490 x 720 mm
1230 x 490 x 720 mm
Approximate weight (without powder)
40 kg
45 kg
Maximum dew point at 6 bar (87 psi)
Class 4 i.e + 3°C (38°F)
Maximum particle-size of solid pollutants
Class 3 i.e 5
μ
m
Maximum oil concentration
Class 1 i.e 0,01 mg / m
0
3
*
Maximum concentration of solid pollutants
Class 3 i.e 5mg / m
0
3
*
Inocart
" equipment air supply pressure
7 bar +/- 1 bar (*)
NDT version
Injection from 0 to 100 and fluidisation at 50
85 l/min max
HF version
Injection at 80 and fluidisation at 43 on
Inobox
85 l/min whatever the position of the shutter
