20
DRT582221110
B - 2023/01
Member of Exel group
2. Description
2.1. General
Xcite
®
+ and Xcite
®
+ Light guns have an Airmix
®
finish:
• High transfer rate: up 86%,
• Designed to access hard-to reach areas.
Airmix
®
spray technology is the best compromise between productivity and finish quality for minimal product loss.
Xcite
®
+ and Xcite
®
+ Light guns are designed to spray:
• Varnishes,
• Lacquers,
• Shades,
• Solvent or water soluble materials,
• High dry extract,
• Polyurethanes,
• Bi components.
Expected use
Airmix
®
spray technology is the best compromise between productivity and finish quality for minimal product loss.
• Simple design: easy to use and maintain.
Performance
• Large tip selection with dedicated X-tra Fine Finish tips for water-based material with wide choice of flow rates
and fan width patterns.
• Job repeatability with our selection of tips that are individually tested to guarantee a consistent pattern.
• Unsurpassed finishing quality and outstanding transfer efficiency with VX24 HVLP aircap.
• Built-in filter with high filtration capacity to avoid tip blockage and minimize pressure loss.
• Diffuser and deflector embedded to decrease the atomizing air consumption and improve atomization.
Productivity
• Easy adjust aircap to facilitate the rotation of the head from horizontal to vertical spray.
• Fluid inlet with or without swivel fitting for low torque effort minimizing operator fatigue.
• Large amplitude of the fan width adjustment for time savings; no need to change the tip.
• Revised swivel conception for longer lifetime.
• Improved trigger design to ensure the operator's comfort.
Sustainability
• Increased operator safety with trigger lock and aircap protection.
• Anodized body with laser engraving not affected by exposure to solvents.
• Construction built to last and compatible with all types of materials (even water-based with stainless steel fluid
passage and Rulon® sealing).
• Double seal technology to prevent aircap leakage and paint return on the air circuit.
