SAMES KREMLIN PU3000 2L 1/1, Translation From The Original Manual

Page: 49 / 154

SAMES KREMLIN Page 37 Manual : 573.199.112

TROUBLESHOOTING
For any intervention on the machine :
- Flush the circuits,
- Shut off the compressed air,
- Depressurize the hoses by triggering the gun,
- Shut off the electric supply.
If a problem occurs during the machine operation, alarms will be displayed on the screen of the
machine.
Input
OK
to disable each alarm.
TROUBLES CAUSES SOLUTIONS
Trouble on the BASE fluid section Check the BASE circuit :
- material in the drum,
- suction rod strainer,
- pump valves.
Clean or change.
Check the CATALYST pressure towards
the BASE pressure.
Trouble on the CATALYST fluid
section Check the CATALYST circuit :
- material in the drum,
- suction rod strainer,
- pump valves.
Clean or change.
Check the CATALYST pressure towards
the BASE pressure.
Incorrect mixing ratio
Flow incorrectly adjusted
Check the material levels in the supply
drums.
Check the starting of the pumps.
Check the CATALYST pressure towards
the BASE pressure.
Irrelevant data capture between the
ratio and the injection volume
(Machine unable to give the
parameters requested) Check that the P1 parameter (ratio) and
the P6 parameter (injection volume) are
compatible in injection capability terms
in relation to the ratio requested
(refer to § 12).



