Index revision : A
7
7159
1.3. Simplified analysis of potential ignition sources according to EN 80079-36
1.4.
Precautions for Use
WARNING : Before any use of the projector, check that all operators:
• have previously be trained by the compagny
SAMES KREMLIN
,
or by their distributors
registered by them for this purpose.
• have read and understood the user manual and all rules for installation and operation, as
laid out below.
It is the responsibility of the operators’ workshop manager to ensure these two points and it is
also his responsibility to make sure that all operators have read and understood the user
manuals for any peripheral electrical equipment present in the powdering area.
1.5. Warnings
CAUTION:
It is imperative that anyone wearing a pacemaker does not use the equipment and does not
enter the projection area.
High voltage can cause the pacemaker to malfunction.
WARNING : This equipment is intended for spraying powder paint only.
WARNING : Safety may be jeopardized if this equipment is not operated, disassembled and
reassembled in compliance with the instructions given in this manual and in any
European Standard or national safety regulations in force.
Risk of ignition
Measures applied to prevent the
source of ignition from becoming
effective
Potential
source of igni-
tion
Description / Main cause
(What are the conditions causing
the risk of ignition)
Description of the measure applied
Hot surface
Vibrator heating in vibrating table
version
Maximum vibrator surface tempera-
ture of 100°C
Static electri-
city
Internal electrostatic discharge in
powder hose
Antistatic hose
Electrostatic discharge on the
cart
Equipotentiality of the metal parts +
earthing
Electrostatic discharge on the
tank for the tank version
Equipotentiality of the metal parts +
earthing
