Index revision : A
20
7159
6.2.1. Inocart H, dual version
•
Step
1
: Place the wall bracket on the cabin wall.
•
Step
2
: Install the dual plunger wiring set.
•
Step 3
:
Install the 2nd Inobox control module and connect (
) the wiring set.
•
Step
4
: Connect the Inogun 12 m to the Inobox.
•
Step
5
: Install the delivered
″
Y
″
on the fluidizing connection at the bottom of the hopper
to connect the 2 fluidizing hoses. The fluidization can be controlled by one or the other
Inobox.
•
Step
6
: Remove the cap of the hopper and insert the 2nd plunger tube equipped with its
powder pump, connect the 2 hoses on the powder pump blue on blue, red on red.
•
Step
7
: Connect the powder hose of the 2nd gun to the 2nd pump CS 130 and connect
the electrode blowing hose on the stainless steel module side and on the gun side.
•
Step
8
: Connect the power supply of the second Inobox control module.
