SAMES KREMLIN
- 5 -
N° : 578.224.110-UK-1710
AIR VALVE SEAL (IND. 26) REPLACEMENT
Take off the air valve (23) - refer to previous paragraph.
Remove the seal (26).
Lubricate the new seal (26) and place it in its housing.
CAUTION : When reassembling, carefully insert the air valve (24) into the gun body
carrying out a rotary motion so as to preformate the valve seal (26).
INJECTOR (IND. 33A/33B/33C/33D/33E) REPLACEMENT
Unscrew the gun fluid hose.
Remove the injector (33a/33b/33c/33d/33e).
Check the injector condition and change it if necessary.
Reinstall the parts in the reverse order of the disassembly sequence.
NOTA : the gun can operate without injector (33a/33b/33c/33d/33e) if necessary.
TRIGGER (IND. 36) REPLACEMENT
Unscrew the needle stop (22) and take off the needle spring (20).
Remove the needle (11) completely by the rear part of the gun.
Dismount the trigger (36) by removing the screw (39) and the trigger spindle (38) by means of two
wrenches n° 5.5.
Reinstall the parts in the reverse order of the disassembly sequence. Apply previously low strength
- Anaerobic adhesive on the screw (39).