SAMES KREMLIN
- 1 -
N° : 578.224.110-UK-1710
CAUTION :
Before any intervention, shut off the compressed air supply and depressurize the
circuits by triggering the gun. controlling the opening of the gun.
The gun is manufactured under the ATEX agreement and can not be modified.
SAMES KREMLIN will not be held responsible for any failure to comply with that
instruction.
Before removing a component of the gun, some precautions have to be taken :
-
Shut off the pump main supply,
-
Empty out the paint inside the cup or the receiver,
-
Fill the cup or the receiver with cleaning solvent,
-
Spray the solvent until it runs clear,
-
Shut off the supply air pressure of the gun,
-
Shut off the fluid pressure,
-
Remove the part to be cleaned or changed.
Before reassemblying the different components, some precautions must be taken :
-
Clean all the parts with the appropriate cleaning solvent and a brush.
-
Install new seals if it is necessary after having lubricated them with PTFE grease.
-
Install new parts if it is necessary.