SAMES KREMLIN
- 4 -
N° : 578.224.110-UK-1710
NEEDLE PACKING (IND. 13) REPLACEMENT
Make sure there is no more paint inside the gun.
For the guns, model FPRO P LP and CONV : unscrew the needle stop (22) and remove the needle
spring (20).
For the guns, model FPRO P LOCK LP and LOCK CONV : unscrew the needle stop sleeve (17) and
remove the needle spring (20).
Remove the needle (11) completely by the rear part of the gun.
Dismount the trigger (36) by removing the screw (39) and the trigger spindle (38) by means of two
wrenches n° 5.5.
Unscrew the packing holder (16) by means of the wrench supplied with the gun.
Take off the needle packing (13) that consists of a seat (14) and a bearing (15).
Insert the bearing (15) into the seat (14) and replace the whole in the gun.
Screw the packing holder (16) moderately.
Reinstall the needle (11).
For the guns, model FPRO P LP and CONV : reinstall the lubricated needle spring (20) and the
needle stop (22).
For the guns, model FPRO P LOCK LP and LOCK CONV : reinstall the lubricated needle spring (20)
and the needle stop sleeve (17) - screwing torque : 5 Nm / 3.688 Ft/Lbs.
Tighten up the packing holder (16) by means of the wrench supplied with the gun and unscrew it by
a 1/4 turn.
Remount the trigger (36).
Feed paint
If there is a leak, screw slightly.
AIR VALVE (IND. 23) REPLACEMENT
For the guns, model FPRO P LP and CONV : unscrew the needle stop (22), then remove the needle
spring (20) and the needle (11) by the rear part of the gun.
For the guns, model FPRO P LOCK LP and LOCK CONV : unscrew the needle stop sleeve (17),
then remove the needle spring (20) and the needle (11) by the rear part of the gun.
Trigger the gun (36) the unscrew the needle stop sleeve (17) by means of the wrench supplied with
the gun.
Take off the valve spring (29) as well as the air valve body (24), the air valve stop (30) and the
carrier (28).
Reinstall the carrier (28) on the new air valve body (24).
Install that new assembly, the air valve stop (30), the lubricated valve spring (29) into the gun body.
Screw the needle stop sleeve (17).
For the guns, model FPRO P LP and CONV : reinstall the needle (11), the lubricated needle spring
(20) and the needle stop (22).
For the guns, model FPRO P LOCK LP and LOCK CONV : reinstall the needle (11), the lubricated
needle spring (20) and the needle stop sleeve (17) - screwing torque : 5 Nm / 3.688 Ft/Lbs.