SAMES KREMLIN 01D140, User Manual

Page: 48 / 61

Replacing pump components
26/05/2020 582115110-EN-indC-Pump-01D140-01D140E.docx
48
11 Replacing pump components
WARNING – Read safety instructions p. 7-17 & 42-43
11.1 Replacing the diaphragm
1. Undo the hexagonal head set screws (A) on one of the housing covers (B)
and remove the housing cover (B).
2. Remove the diaphragm (1) from the piston rod by turning anticlockwise.
3. Tightly screw the new diaphragm (1) in clockwise direction on to the piston
rod.
4. Mount the housing cover (B) using the hexagonal head set screws (A).
Make sure the O-rings (23) sit in the groove of the cover.
5. Tighten the hexagonal head set screws diagonally to a torque of 25 Nm .
6. Repeat the procedure on the other diaphragm side.