SAMES KREMLIN 01D140, User Manual

Page: 33 / 61

Installation
582115110-EN-indC-Pump-01D140-01D140E.docx 26/05/2020 33
Connections
1. Install the pump on a horizontal and flat surface with the pump
base flat. The pump only works in this position.
Fix the pump using suitable fastening screws to ensure its stability. Do
not immerse the pump in the medium to be conveyed.
Check if additional shut-off valves need to be installed.
2. Provide a compressed air hose from the compressed air source to
the pump.
The plug connector (1) of the pump is
∅
8 mm (see “technical
characteristics”).
Connections on the pump
3. Provide flexible suction and outlet connections (e.g. hose
connections).
The flexible couplings prevent vibrations from being
transmitted to the piping system.
4. Pay attention that the connections are compatible with the
conveyed medium and are able to withstand high pressures.