Doc.-ID: 210212-PT10BA-ES-RoughCam IPP1275_en_rev.00.docx, Page 8 of 20
3
Safety Instructions
Please observe the national safety regulations and regulations for prevention of
accidents, as well as to the safety instructions given below in this User Manual!
Attention!
Repairs may only be carried out by using original parts from the man-
ufacturer. Repairs may only be carried out in accordance with the na-
tionally applied regulations and exclusively by the manufacturer.
Attention!
Prior to installation, take external sources of heat or cold into account!
The temperature ranges prescribed for storage, transport and operat-
ing must be adhered to!
4
Installation
For commissioning and operating the camera, the relevant national regulations, as well
as the generally accepted rules of technology shall prevail. Before mounting the camera,
thoroughly check it for any transport damage, especially on the housing and cable. Instal-
lation, electrical connection and the first start must only be carried out by qualified spe-
cialists.
Work preparation:
Attention!
Prepare your work carefully and in accordance with the relevant
regulations.
To ensure the best image quality delivered by the network camera, plan the installation
site carefully (consider light conditions, object distance or size, angle and minimum object
distance to the focus).
Use appropriate tools and aids.
When working, ensure a safe stand.
Make sure that any static charge is avoided.
The RoughCam
®
IPP1275 consists of a robust sensor housing (T10) and a Main Unit
P12 MkII for safe areas. The sensor unit is equipped with a flexible cable (5 to 25 m).
Mount the sensor unit according to the desired field of view. Install the main unit so that a
good accessibility is provided, in order to facilitate electrical connection.
