Doc.-ID: 210212-PT10BA-ES-RoughCam IPP1275_en_rev.00.docx, Page 15 of 20
6.3.2
Removing / inserting a SD memory card
Note:
The RoughCam IPP1275 has a slot for a micro SDHC memory card (card not included).
Saved video files can be played and deleted via the web interface. They are also availa-
ble in a download list. Moreover, the videos available in the memory card can also be
accessed via FTP server in the network.
If the memory card has to be replaced by the user, it should be, as far as possible, empty
and pre-formatted with an ext4 or vFAT file system.
When touching electrical components, observe potential equalization
(grounding of the body): carry electrostatic-discharge clothes, a PE
wristband etc.!
6.4
Closing of the housing
For closing the housings, proceed in reverse order as when opening. Use exclusively
original screws included in the supply.
Attention!
Do not lock-in any foreign objects in the housing.
Dismantled screw locks (spring washers DIN 127A) must be used again.
The GYLON® gasket must be used in undamaged condition, according to the flange hole
pattern, and placed between the flange and the hull. The lateral position of the flat sur-
face / contact surface is arbitrary.
If, when closing the housing, you see that the surface of the fitting gap is dirty or insuffi-
ciently lubricated, clean it with a clean cloth and de-grease it with a suitable cleaning
agent. Then re-grease it with lubricant suitable for this specific application (e.g., Mo-
lykote® P-40 gel for standard applications or special grease OKS 403 in the event of
heavy seawater influence).
The screwed connections of flange and body components must always be tightened
crosswise
to a torque of
1.2 Nm
! Do not tighten the screw too strongly! It can cause rup-
ture of the cylinder head or over-stretching the threads, and thus to impairment of the
pressure resistance or ignition protection class
Cylinder-head bolts for connection of the camera body with the flange
component must always be tightened at a 1.2 Nm torque - crosswise
and evenly!
