24
XT
REAR DISC MOWER
OPERATOR'S MANUAL
WARNING!
Set the pressure in the working system before starting the mower, as otherwise
unloading cylinder may be damaged.
NOTICE:
After switching button (3)
to ON (4) position the automatic override to OFF (5)
position will follow after 1 minute - even without the need of the operator's action.
WARNING!
Making the oil flow from the tractor to working system will cause increase of
pressure in the system.
NOTICE:
Increasing pressure
–
lower impact on the ground.
Reducing pressure
–
bigger impact on the ground.
5.2.2.
Setting mower in position for driving on headlands and transport position
To set the mower in position for driving on headlands (
) use
button (
1
)
on control panel (
) and lever to control the tractor's external hydraulics.
Activation/deactivation of a given button is indicated by activated/deactivated LED (
2
) above the button
(STOP position).
To set the cutting unit lifting lock for driving on headlands, press button (
1
)
so that LED (
2
) -
STOP position above the button is activated. To unlock the cutting unit press button (
1
)
again so
that LED (
2
) STOP position above the button is deactivated.
NOTICE:
Activated LED (
2
) - STOP position above the button (
1
)
means that the cutting unit
lifting is locked.
Deactivated LED (
2
) - STOP position above the button (
1
)
means that the cutting
unit can be lifted / lowered freely.