SaMASZ Tornado 202, Operator'S Manual

Page: 17 / 31

17
OPERATOR’S MANUAL ROTARY SNOW BLOWER TORNADO
Fig. 9. Proper rotation direction of gear shafts
Depending on tractor's PTO shaft's rotation direction, telescopic articulated shaft needs to be
connected to corresponding gear shaft ( Fig. 9 ). Connect the shaft's end equipped with overrunning
clutch to the machine. Rotary snow blower is factory equipped with telescopic articulated drive shaft
with either right- or left hand overrunning clutch and with machine in-built telescopic articulated shaft
in accordance with
Tab. 4. Application of two different drive shafts is due to various rotation
directions of front PTO shafts in tractors ( Fig. 10 ).
Fig. 10. Rotation directions of PTO shafts in current tractor series
Tab. 4 provides list of telescopic articulated shafts which are necessary for proper operation of the
tractor-blower aggregation including division as on the figure above.
1000 rpm
(WET front linkage)
540÷750 rpm
(OET front or rear linkage)
b) OET a)WET