User's manual
CIRCULAR SAW - PT
- 7 -
3.3.
Standard equipment and spare parts
Saws are sold with the following standard equipment:
warranty card,
operator's manual with spare part list,
spray paint (150 ml).
Equipment and spare parts:
all parts found in catalogue of parts.
4.
SAFETY CONDITIONS
NOTE!
Circular saw poses danger when used. It can exclusively be operated by a
trained person or a person under training and under supervision of an
experienced operator.
Each circular saw operator should be fully aware of potential risks resulting from
its operation and should know how these are avoided.
Whenever the circular saw is used, always make sure to use proper individual
protection equipment.
•
Safety helmet
•
Ear protection
•
Protective gloves
Operator should always have a first-aid kit within his reach.
4.1.
General safety principles
Connecting
Mount and dismount the circular saw on an extension arm with the latter mounted on the
tractor, and when the whole aggregation is arrested by the tractor’s engaged parking brake.
Prior to starting the tractor, set the arm's foot in a position that is convenient for mounting the
saw.
When connecting hydraulic hoses to the circular saw’s nozzles wear protective eyewear,
protective gloves and protective wear.
Mount and dismount the extension arm-circular saw aggregate to and from the tractor on even
and paved surface while keeping particular attention.
Never stand between the tractor and the machine, unless the tractor-extension arm aggregate is
protected against moving with the tractor's parking brake.
Tractor's 3-point linkage should be adjusted, so that stiff connection between the tractor and
the extension arm, onto which the circular saw is mounted, is the result.
Tractor with the mounted aggregation of extension arm and the circular saw should be
balanced in the manner, which allows stability of the whole aggregation of the tractor and
extension arm.
Mount the circular saw on the extension arm only with use of genuine fittings and safety
devices.
When connecting hydraulic hoses to tractor hydraulic connectors make sure, that either tractor
or the extension arm aggregate hydraulics are pressure free.
In order to have the drive transmitted from the tractor onto the extension arm aggregate, use a
manufacturer-recommended PTO shaft only.