User's manual
CIRCULAR SAW - PT
- 18 -
NOTE!
Use only genuine SaMASZ fittings and spare parts. Spare parts of unknown
origin or new made feature lower strength and have unfavorable influence on
the device’s performance and overall safety, and virtually in all cases
increase maintenance costs.
NOTE!
The SaMASZ co. does not bear any responsibility for damages and defects
caused as a result of applying non-genuine parts and fittings.
8.
OPERATING SERVICE
Tab. 4. Torque values for bolts
9.
MAINTENANCE AND STORING
Upon dismounting the circular saw from the extension arm, if the idle period for the circular
saw is longer than one month, perform the following maintenance works:
•
Clean the circular saw thoroughly from any dirt and then wash and dry it.
•
Should the circular saw require any repairs, adjustments and supplementations, or grease, seal
replacements, perform them.
•
Remove any sources of corrosion and complement any paintwork defect.
•
Protect metal surfaces with thin layer of solid grease, e.g. ŁT – 43, or mineral engine or
gearbox oil, e.g. 15W40.
The circular saw should be stored under roof and in manner which effectively prevents
animals and people from being injured.