User's manual
CIRCULAR SAW - PT
- 12 -
For hoisting do use hoists with capacity bigger than the circular saw's weight as indicated on its
data plate. It also applies to the necessary cables and chains,
Transport belts, belt suspensions, ropes cannot be damaged. Whenever damages to these parts
are found, replace these with new ones,
When mounting slings, chains, clamps, etc. always keep in mind the centre of gravity of the
machine (Fig. 5) ,
For seizing the machines pick lines of adequate length, so that the angle between them was no
greater than 120°, and the angle of inclination between the cable and the vertical was no greater
than 60°,
collapsible elements should be locked in transport position,
when relocating the machine onto another vehicle, there should be no unauthorized personnel
permitted to remain within the danger area,
The machine should be protected from shifting on the vehicle's trailer.
Fig. 5. Location of centre of gravity
Tab. 2. Location of centre of gravity
Dimension [mm]
Type
PT3 – 190
PT4 – 250
A
170
180
B
410
430
C
900
1150
NOTE!
Protecting the maneuver area and providing safety for operation performed is
responsibility of the person in charge of the machine moving.
A
B
C