Operating manual
Tractor mounted snow plow
PSV, PSV Up, PSV Up H
- 21-
After 5 work hours:
check the condition of blade inserts,
check the condition of mount securing bolts and replace if necessary,
when installed adjust the height of support wheels or skids if necessary.
After finishing work:
carefully clean and wash the plow,
Tab. 6.
Values of bolt tightness
7. MAINTENANCE AND STORAGE
In the event when the plow will be parked for a period longer than two weeks, always perform
the following maintenance:
carefully clean and wash the plow,
if the plow requires repairs, adjustments, gasket replacement, or hose replacement this should be
completed,
remove any rust spots and touch up any damaged paint.
protect metal surfaces with a light coating of a thick lubricant such as ŁT – 43, mineral oil or
gear oil like 15W40.
replace any illegible warning or informational signs.
protect the connecting fittings of the hydraulic hoses.
The snow plow should be stored in the retracted position - with the actuators retracted in a dry
and clean place, not accessible to unauthorized personnel or animals, on flat level and hard surface
under a roof or other covering which will protect it from atmospheric weather conditions.
8. TRANSPORT AND DELIVERY
ATTENTION!
The snow plow is delivered assembled, fully adjusted and ready for use.
During transport the snow plow should be on a level and hard surface and
should be secured using transport belts to prevent it from shifting. When
loading the plow on a transport vehicle it should be lifted using transport
hooks/openings which are marked with special labels. Use only a lift/hoist
with the lifting capacity no smaller than the weight of the snow plow.
A
6.8
8.8
10.9
12.9
MA [Nm]
M4
2.2
3.0
4.4
5.1
M5
4.5
5.9
8.7
10
M6
7.6
10
15
18
M8
18
25
36
43
M10
37
49
72
84
M12
64
85
125
145
M14
100
135
200
235
M16
160
210
310
365
M18
220
300
430
500
M20
310
425
610
710
M22
425
580
820
960
M24
535
730
1050
1220
