Page
1
of
2
Białystok, 2013.10.07
ERRATA
Subject: controlling plows AlpS, PSV, City – standard and optional control panel
5.2.1. Standard control:
CAUTION:
Prior to mounting plow make sure that polarity of aggregated machine is the same as
driver's (
Fig. 1
). Wrong polarity will cause damage to the driver.
Fig. 1.
Polarity of driver's plug
Once hydraulics and power plug are connected, move control panel along with cable to
tractor's cabin and connect the plug to lighter's connector 12V (
Fig. 2
). In order to lift/lower the
plow, use control lever for tractor's front 3-point linkage. Hydraulics control lever is used to rotate
shield. Switching between right and left plow's shield is possible thanks to switch (
B2
) on control
panel (
B
). In order to turn clearance lights on/off use switch (
B1
) on control panel (
B
). Switching
on is signaled by flashing diodes above the switch.
In order to extend life of coil on electric valve the driver automatically switches to left wing
after one minute.
Fig. 2.
Controlling plow AlpS: A – Lighter's plug, B – Control panel
(B1 – clearance lights switch, B2 – shields control lever – right/left),
C – Hydraulics and tractor's front 3-point linkage control switch (* - the control differs depending on
tractor's type)
B1
B2
C*
A
B
-
+
