Operator’s manual
Double-sided disc mowers
with central suspension
- 32 -
6.8.2.
Conveyor belt replacement and adjustment instruction
Mower KDD 860/940 with conveyors must be suspended onto tractor. Lean the mower with
use of upper connector (cylinder) maximally to the front – in order to increase the distance between
conveyor and the ground.
I.
Steps to be taken when transporting in operating position (horizontal).
1.
Using a marker, mark lines on millimetre measures – decal 27 (if belts worked well).
2.
Loosen tightening roller mechanism – screws M10 - S
1
, nuts M12 – N
2
and loosen
adjustment screw M12 – S
2
by approx. 30 mm (Fig. 31).
`
Fig. 31.
II.
Steps to be taken when transporting in vertical position. Mower shall be leaned to the front
so the distance between conveyor and the ground is approx. 1 m.
1.
Loosen screws M10 – S
1
, nuts M12 – N
2
adjustment screws M12 – S
2
of front tensioners
(Fig. 32).
Fig. 32.
N
S
2
S
2
S
2
S
1
Driving roller hydraulic
engine
(do not adjust)
30 mm
N
N
S
1
S
1
measure
