Operator’s manual
Double-sided disc mowers
with central suspension
- 11 -
To put the mower onto another vehicle in a safe way, please obey the following rules:
seize the mower by any lifting devices only in places indicated by hook sign (Fig. 7),
Fig. 7. Transport holders (without cutterbars)
for mower lifting use only lifting devices with hoisting capacity bigger than mower’s weight
shown in data plate. It also concerns ropes and chains used for lifting,
collapsible parts should be blocked in transport position,
during putting the mower onto another vehicle it is forbidden for anybody to remain in transport
area,
on the vehicle’s trailer the machine should be secured against moving.
CAUTION:
Securing maneuvering area and transport of the mower remains
responsibility of a person who does it.
4.3.
Working parts
Before operating the mower check knife’s and knife holder’s condition.
Worn or damaged knives or knife holders should be immediately replaced with new one.
4.4.
PTO shaft
Use only PTO shafts recommended by mower’s manufacturer.
4.5.
Residual risk
Despite the fact, that company SaMASZ Białystok – the manufacturer of that mower takes
responsibility for design and manufacturing of the mower, in order to eliminate dangerous
situations, certain risk during mower operation is unavoidable.
1. Danger of catching
This kind of risk occurs when changing position of a mower, operation near rotating parts,
working without safety guards.
During operation, maintenance and regulations always wear protective gloves, shoes and
clothes without loose parts, belts and so on. Always comply with safety decals placed on the
mower.
2. Danger of injury
This kind of risk occurs during replacement of working parts with sharp edges. During any
maintenance work always use safety gloves.
Transport holders
