Instruction manual
Fodder wagons OptiFEED
2
1.
DEVICE IDENTIFICATION
Fig. 1. Identification plate
The identification plate contains:
A. full name of the manufacturer,
G. QC mark,
B. serial no.,
H. CE mark means that the rake complies with
C. symbol,
Directive 2006/42/EC and harmonized
D. version number,
standards,
E. date of manufacture,
I. MADE IN POLAND inscription,
F. weight (no load),
J. barcode.
NOTE!
UNITS WITHOUT BRAKES ARE TO BE USED ONLY ON FARM
AND ONLY AT MAXIMUM SPEED OF 8KM/H.
Maximum reached noise, according to EN 1553:1994 regulation is 76 dB.
2.
USAGE
Fodder wagon is made for preparing fodder and feeding cattle. It is supposed to work in
adequate conditions, i.e. the field is cultivated properly and fodder’s ingredients do not contain any
extraneous matter. Fodder wagon can be utilized, maintained and repaired only by people who have
read this manual and are aware of the machine’s functions and any possible dangers connected with
it. The use of the wagon in any other way than it is advised by the manufacturer is ill-advised and
the supplier does not take responsibility for the damages caused by it. It is advised to adhere to the
rules set out by this manual in order to avoid machine failure, body damage or any other accidents.
One should also comply with standard OSH rules and traffic regulation.