Instruction manual
Fodder wagons OptiFEED
13
One auger fodder wagons
MODEL
UNO (BASIC)
UNO L
UNO S
Capacity
[m
3
]
6
8
10
12
6
8
10
12
6
8
10
12
Maximum load
[t]
3,0 3,5 4,0 4,5
3,0 3,5 4,0 4,5
3,0
3,5
4,0
4,5
8.4.
MAINTENANCE
In order to keep fodder wagon in standby mode, proper maintenance is required. Every day,
before using the machine, perform a review. Walk around the machine, checking its external parts.
Check for damaged or missing parts. Before lubricating and performing any repairs, always
disconnect power-take off and turn off tractor’s engine. Never turn on the machine without covers
in place. Some elements of hydraulic system may get hot while machine is working. Before
inspecting the machine or performing maintenance, leave it to cool off.
After first 25h of use, check all screws’ and packings’ connections, tires’ pressure, and
whether wheels’ screws are tightened up. After every 50h, check gearbox oil, lubricate unloading
doors’ guide, and inspect the auger. After every 100h lubricate power take-off’s transmission
points, extend shaft halves, lubricate the runner, check tires’ pressure, and tighten wheels’ screws.
Every year, check hydraulic hoses for any damages or breaks, if there is a need, replace them.
Check the bearings in road wheels, if there’s a need, regulate. Fill wheel cover with grease, check if
the screws are tightened up.
Two auger fodder wagons
MODEL
DUO
DUO (S)
Capacity
[m
3
]
12
14
16
18
20
22
12
14
Maximum load
[t]
4,5 5,0 6,55 7,4 8,0 8,8
4,5
5,0