Sam4s SPS-500, Operation Manual

Page: 19 / 180

- 19 - SPS-500
DISPLAY MESSAGES
Same Check Track Required
The register allows the operation of four check tracking files, the opening and closing of the balance should be
carried out on the same check type function key. An attempt has been made to open a balance using one check type
function and closed on another.
Not Scaleable PLU
Registration of a PLU not set as scalable has been made, the correct product type should be sold
EJ Buffer Full
The electronic journal memory of transactions, has reached the maximum limit set within the memory allocation, the
report should be reset.
Must Be Start<=End In Range
When entering a range, the end of the range must be greater than the starting value
Range Overlap
The range entry for reporting or programming is incorrect.
Final End Should Be 9 Or 99
The ending value has been entered incorrectly re-enter with either a 9 or 99
Not PLU
The key selected for the sequence is the incorrect type, re-select a PLU key
Not WLU
The key selected for the sequence is the incorrect type, re-select a WLU key
Print Key Required
During registration the print key has been pressed in order to send none kitchen print items to the order printer, press
the Print key again to finalize the key sequence.
Surcharge Not Allowed
The sale has been restricted preventing the addition of an amount during the current procedure
Decimal Entry Required
The current sequence requires the entry of a decimal amount
System Reg# Required
The current operation must be carried out on the register set within the service option to store the check tracking /
clerk interrupt and other balance data.
Training Emp File# Required
The attempt to print a training report, or access clerk training operations is not possible unless the training clerk
settings have been allocated within the program mode system options
Time In/Out Reg# Required
The time in / out function can not be operated until the service mode settings have been programmed to determine
the register storing time clock sales
Check Tracking Reg# Required
The check tracking function can not be operated until the service mode settings have been programmed to
determine the register storing the check tracking sales