172
•
Program Mode Programming
SAM4S SPS-300 Series Electronic Cash Register AU
System Option Programming (
for v01.011 and later
)
NOTE
: If your
SPS-300
is loaded with
v01.010 or earlier
version
firmware, please see
Appendix
for System Option Screen Images and Reference Information.
Refer to " System Options - Reference Information " to make program entries or changes, press the
ENTER
(
CASH
) key to finalize your change, then
ESC
(
CLEAR
) to exit. Default value has been
highlighted in
bold
print.
1.
At the
PGM
control lock position menu, press
3
for
SYSTEM OPTION
Programming. The
SYSTEM OPTION pg 1
screen displays:
2.
To browse through the options:
•
Press
ENTER
key to move “
Å
” symbol
option by option
, or
•
press
PAGE UP
or
PAGE DOWN
for fast browsing
page by page
.
3.
When reaching the option you want to modify,
•
For
STORE NAME
programming on
pg18 (page18)
, the keyboard will change to
Program Overlay
, enter the character you need up to
8
characters. Or enter Descriptor
Code to make up the description you want.
NOTE
:
System Option
is default to
Program Overlay
. Please check setting on
page 17
•
For
numeric
programming options, enter the number through numeric pad,
•
For
Yes/No
programming options, press
YES/NO
key to toggle between
Y
and
N
SYSTEM OPTION pg 4
CASH DECLARATION REQ
BEFORE REPORTS N
Å
MGR CONTROL TO TEND.
NEGATIVE BALANCE N
ZERO BALANCE N
RESET TRANSACTION NO.ON Z RPT N
SYSTEM OPTION pg 3
SECONDS TO ALLOW DRAWER OPEN 30
Å
(0-99)
ALLOW POST TENDER N
OPEN DRAWER ON POST TENDER
Y
ALLOW MULTIPLE RECEIPT
Y
SYSTEM OPTION pg 2
CLERK IS Y:POP-UP N
Å
N:STAY-DOWN
DRAWER NEEDS TO BE SHUT TO
OPERATE Y
ACTIVATE OPEN DRAWER ALARM N
SYSTEM OPTION pg 1
BEEPER ACTIVE Y
Å
RESERVED N
CLERK ENTRY 0
0:PUSH 1:CODE
CLERK ASSIGNED WHEN CLERK KEY
IS PUSHED (1-10) 1
SYSTEM OPTION pg 1
BEEPER ACTIVE Y
Å
RESERVED N
CLERK ENTRY 0
0:PUSH 1:CODE
CLERK ASSIGNED WHEN CLERK KEY
IS PUSHED (1-10) 1
