SAM4s SPS-2000 Operator Manual v1.18
Appendix
•
145
Appendix
Report Function Key Report Code Structure
You can print out reports from the REG tab using the REPORT key. Reports are generated by first entering
the report code, then touching the REPORT key, i.e:
[Report Code] [REPORT]
The REPORT key code is #36 and is available on software versions 2.00j or later.
Report Code Structure
010100
The report code example above “010100” generates an X1 Standalone Financial Report.
Report # Table
NO.
REPORT NAME
X/Z & REPORT LEVEL
IRC
01
Financial
X1 & Z1 also X5 to Z5
INDIVIDUAL & IRC
02
Sales by Time Period
X1 & Z1 also X5 to Z5
INDIVIDUAL & IRC
03
All PLU’s
X1 & Z1 also X5 to Z5
INDIVIDUAL & IRC
04
Not use this by REPORT key function.
05
PLU’s by Group
X1 & Z1 also X5 to Z5
INDIVIDUAL & IRC
1. Enter the 2-digit report number. See the “Report Table” below.
2. Enter “0” for X reports; enter “1” for Z reports
3. Enter the report level: “1” through “5”
4. Enter “0” for standalone reports: enter “1” for IRC reports, (or “2’ to view
IRC for all registers without entering the IRC range with v.2.02b or later).
5. Enter the option code, 1-4 digits. See the “Report Option Table” below. If
no option is selected, enter “0”.
Summary of Contents for SPS-2000
