Sam4s ER-900 Series, Operation & Programming Manual

Page: 100 / 185

96 
Program 300 - PLU Descriptor Programming
Program descriptors by typing the letters on the alpha keyboard overlay or by
entering the alpha code, as shown in the alpha code table.
To enter descriptions using alpha character codes you must select this in system option
#25 within System Option Programming
1. Turn the control lock to the PGM position
2. To begin the program, enter
3 0 0 , press the SBTL key.
0 SBTL 0 3
3. Select the PLU you wish to program in one of the following ways:
Individual PLU Selection
Keyboard Button
 Press a PLU key on the keyboard.
PLU
PLU Number
 Enter the PLU Number and press the
PLU
key.
PLU
Enter the PLU#,
up to 15 digits
4. Enter the characters using with the alpha keyboard or code entry mode.
Character Entry
Keyboard Entry
Type up to 18
descriptor keys
QTY/TIME
Character Code Entry
QTY/TIME
Enter up to 18
three-character
codes
5. For additional PLUs, repeat as above or press the CASH key to Finish
CASH