Sam4s ER-900 Series, Operation & Programming Manual

Page: 27 / 185

 23
RECEIPT ON/OFF
When 'OFF' no receipt will print during a sale.
Note If the receipt is off, a buffered receipt is available by
pressing the CASH key a second time.
RECD ACCT
The RECD ACCT (received on account) key is used to
record media loaned to the cash drawer, or payments made
outside of a sale. The cash drawer will open when pressed.
The amount received adds to the cash-in-drawer total.
SERVICE
Use to temporarily finalise Check Tracking transactions.
SUBTOTAL
Displays the subtotal of the sale including tax. For
adjustments this must be pressed prior to a sale discount or
sale surcharge.
TABLE #
Used with Check Tracking for tracking of the current balance
for a guest check or table.
TABLE ADD
This is used to move or combine existing check balances
TAX EXEMPT
Press the TAX EXEMPT key to exempt tax 1, tax 2, tax 3,
and/or tax 4 from the entire sale.
TAX (1-4) SHIFT
When pressed before a PLU entry, the tax shift keys reverse
the tax status of the PLU, i.e., a PLU with non-tax status
would become taxable or a PLU with tax status would
become non-taxable.
TIP
The
TIP
key allows a gratuity to be added to a guest
check before payment. The tip amount is deducted from
the Cash-in-Drawer amount for the Clerk/Cashier closing
the guest check.
The
TIP key may be programmed as either a percentage
or amount. If programmed as a percentage, tax
programming defines whether the percentage is calculated
on the net amount or the amount after taxes.
VOID
Use to correct an item entered earlier within a sale. The
VOID key corrects the appropriate totals and counters. To
correct the last item, use the ERROR CORR key.
For void operations outside of a sale (Transaction Void), use
the VOID position on the control lock. The Financial report
records totals for each type of void separately.
VALID
Press the VALID key to print a one-line validation on a
separate form or piece of paper. Any item registration,
discount or payment may be validated.
WASTE
The WASTE key allows control of inventory by accounting
for items, which must be removed from stock due to
spoilage, breakage or mistakes.
Press the
WASTE key before entering wasted items, then
press the WASTE key again to finalise.
The WASTE key may be under manager control, requiring
the control lock to be in the X position. The
WASTE
operation is not allowed within a sale.