manualshive.com logo in svg

Sam4s ER-5200M, Operator'S And Programming Manual

Share
Download
Sam4s ER-5200M Operator'S And Programming Manual Download Page 18

16  •  Introduction 

ER-5200M/5240M Electronic Cash Register 

Control Lock 

The control lock has 7 positions, accessed with 5 keys.  Each ECR is shipped with two full sets of 
keys. 

 

VOID 

Use to void (correct) items outside of a sale. 

OFF 

The register is inoperable. 

REG

 

Use for normal registrations.   

X

 

Use to read register reports. 

Z

 

Use to read register reports and reset totals to zero. 

P

 

Use to program the register. 

S 

The S position is a hidden position reserved for dealer 

 access. 

 

Before performing any operations in Register Mode a clerk must be signed on.  See “Clerk Sign-
On/Sign-Off” for a description of clerk operations.   

Control Keys 

The

 ER-5200M/5240M 

includes two sets of keys that may be used to access the following control lock 

positions.   

 

Key 

Positions Accessible 

REG 

OFF, REG  

VOID 

VOID, OFF, REG, X 

Z 

VOID, OFF, REG, X, Z 

P 

VOID, OFF, REG, X, Z, P 

C 

ALL POSITIONS 

 

Note:  Keys may be removed from the control lock in the OFF or REG positions.   

VOID

 

P

 

Z

 

X

 

REG

 

OFF

 

S

 

Summary of Contents for ER-5200M










































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands