Sam4s ER-5200M, Operator'S And Programming Manual

Page: 119 / 201

ER-5200M/5240M Electronic Cash Register P-Mode Programming • 117
# Option Description
26 Table Management, or
Clerk Interrupt
Clerk Interrupt allows you to temporarily
suspend an incomplete transaction by signing
on a new clerk. The new clerk can begin a
new transaction with the first transaction
temporarily suspended. The original
transaction can be recalled for completion by
signing on the original clerk. You cannot use
check/table tracking or charge posting when
the clerk interrupt system is implemented.
Using the clerk interrupt feature requires
allocation of at least 2 guest checks and
sufficient soft check lines to support the
interrupted transaction (i.e. if 20 soft check
lines are allocated, a transaction with up to
20 lines can be interrupted.)
27 Modifier is:
Pop-up after item?
Pop-up after sale?
Stay-down?
A MODIFIER key alters the next PLU
registered, either by changing the code
number of the PLU so that a different item is
registered, or by adding the modifier
descriptor and not changing the code of the
subsequent PLU. If you press a modifier
key, you have the option of the modifier
applying only to the next item (0), having the
same modifier apply to any subsequent item
registered in the same transaction (1), or
having the same modifier apply to any
subsequent item on any subsequent
transaction (2).
28
Require manager to open/close checks?
Enable charge posting functions?
When Y, you must turn the key lock to the
MGR position if you wish to open a new
check or close a check. This option will
usually be Y when a charge posting system is
implemented and you do not wish a clerk to
inadvertently open a new account.
When charge posting is enabled, the
FINALIZE, PAYMENT, and PAY TENDER
keys are enabled.
29
Buffer memory use
Normal
Use
More than 100 lines
If set to “normal use” transactions are limited
to 100 items. If set to “more than 100 items”
transactions can exceed 100 items, however,
the receipt will not print items, only the total.