SAM4s ER-5115II Electronic Cash Register v1.6
Programming
93
Function Key Assignment Programming
Function keys may be relocated, inactivated or changed with this program. For example, you may
wish to place functions, such as
PREVIOUS BALANCE
and
SERVICE
, which are not placed on
the default keyboard. Or perhaps, you may wish to remove a function, such as
CANCEL
, for
security reasons.
Please note the following limitations:
If you assign a duplicate of a function code, the duplicate will function exactly as the
original - you will not get separate totals and counters on reports for the duplicated key.
You can reassign keys only in locations that are programmable. See "Keyboard" on
page 20, where the key locations that may be programmed are identified.
To Assign a Function Key to a Location:
1.
Turn the control lock to the
S
position.
2.
Enter 20, press the
SBTL
key.
0
2
SBTL
3.
Refer to "Function Key Codes" on page 94 to find the code for the key you wish to
assign. Enter the code, press the location you wish to program, or press
CASH
to
cancel function key assignment programming.
Key
Location
Key Code
4.
Repeat from step three for each key you wish to program, or press the same key to
finalize the program.
Same
Key
Summary of Contents for ER-5115II
Page 4: ......
Page 6: ......
Page 26: ...22 Introduction SAM4s ER 5115II Electronic Cash Register v1 6...
Page 68: ...64 Operations SAM4s ER 5115II Electronic Cash Register v1 6...
