SAM4s ER-5115II Electronic Cash Register v1.6
Programming
157
Drawer Limit Programming
You can set the total amount of cash and checks allowed to be in cash drawer at one time. (When
the limit is equaled or exceeded, the error tone will sound at the completion of each transaction. You
can clear the error to continue operations, or you can use the Paid Out function to remove enough
cash or checks to reduce the drawer total below the limit set here.)
Programming the Drawer Limit
1.
Turn the control lock to the
P
position.
2.
To begin the program, enter
1
2
0
0
, press the
SBTL
key.
0
SBTL
0
2
1
3.
Enter a drawer limit (up to 8 digits or
0
for no limit); press the
X/TIME
key.
X/TIME
Enter the drawer
limit, up to 8
digits
4.
Press the
CASH
key to finalize the program.
CASH
Machine Number Programming
You can set a machine number to print on the receipt and journal paper. If you have multiple
registers or stores, use this number to identify the machine where the transaction took place.
Programming the Machine Number
1.
Turn the control lock to the
P
position.
2.
To begin the program, enter
1
3
0
0
, press the
SBTL
key.
0
SBTL
0
3
1
3.
Enter a machine number (up to 2 digits); press the
X/TIME
key.
X/TIME
4.
Press the
CASH
key to finalize the program.
CASH
Summary of Contents for ER-5115II
Page 4: ......
Page 6: ......
Page 26: ...22 Introduction SAM4s ER 5115II Electronic Cash Register v1 6...
Page 68: ...64 Operations SAM4s ER 5115II Electronic Cash Register v1 6...
