Sam4s ER-5115II, Operator'S And Programming Manual

Page: 55 / 183

SAM4s ER-5115II Electronic Cash Register v1.6 Operations

51
Training Mode
A training mode is available so that you can operate the cash register without updating totals and
counters. Note the following conditions:

The receipt and journal print the message "TRAINING MODE BEGIN" when training
mode is activated.

The receipt and journal print the message "TRAINING MODE END" when training
mode is exited.

The message "TRAINING MODE" prints on each receipt printed while training mode
is active.

The journal does not print during training mode.

The total and counter on the financial report labeled "TRAIN TTL" is updated with the
net amount of each training transaction.
To Enter Training Mode

Set system option #32 to a value of
1
. See "System Option Programming" on page
110.
To Exit Training Mode

Set system option #32 to a value of
0
. See "System Option Programming" on page
110.