Sam4s ER-390M Operation And Program Manual Download

Page: 42 / 187

•

Operating Instructions

ER-390M

Waste

The

WASTE

key allows control of inventory by accounting for items that must be removed

from stock due to spoilage, breakage or mistakes. Press the

WASTE

key before entering

wasted items, and then press the

WASTE

key again to finalize. The

WASTE

key may be

under manager control, requiring the control lock to be in the

position. The

WASTE

key is

not allowed within a sale.

Press the

WASTE

key. The message

"WASTE" displays at the top of the
screen.

WASTE

Enter the item or items that are wasted.

Press the

WASTE

key again to total the

wasted items:

WASTE

THANK-YOU

CALL AGAIN

DATE 01/15/2003 WED TIME 08:33

***WASTE***

PLU1 $1.25
PLU2 $1.50

***WASTE***

TOTAL $2.75
CLERK 1 No.000011 00001

Summary of Contents for ER-390M




























































































































































































Search results

Summary of Contents for ER-390M

Reviews:

Related manuals for ER-390M

Brands by name

Popular brands

Sam4s ER-390M, Operation And Program Manual

Search results

Summary of Contents for ER-390M

Reviews:

Related manuals for ER-390M

Brands by name

Popular brands