Sam4s ER-390M Operation And Program Manual Download

Page: 19 / 187

ER-390M

Getting Started

•

Control Lock

The control lock has 7 positions, accessed with 5 keys. Each ECR is shipped with two full
sets of keys.

VOID

REG

OFF

VOID

Use to void (correct) items outside of a sale.

OFF

The register is inoperable.

REG

Use for normal registrations.

Use to read register reports.

Use to read register reports and reset totals to zero.

Use to program the register.

The S position is a hidden position reserved for

dealer access.

Before performing any operations in Register Mode a clerk must be signed on. See “Clerk
Sign-On/Sign-Off” for a description of clerk operations.

Control Keys

The

ER-390M

includes two sets of keys that may be used to access the following control lock

positions.

Key

Positions Accessible

REG

OFF, REG

VOID

VOID, OFF, REG, X

VOID, OFF, REG, X, Z

VOID, OFF, REG, X, Z, P

ALL POSITIONS

Note: Keys may be removed from the control lock in the OFF or REG positions.

Summary of Contents for ER-390M




























































































































































































Search results

Summary of Contents for ER-390M

Reviews:

Related manuals for ER-390M

Brands by name

Popular brands

Sam4s ER-390M, Operation And Program Manual

Search results

Summary of Contents for ER-390M

Reviews:

Related manuals for ER-390M

Brands by name

Popular brands