Sam4s ER-380M Operation And Program Manual Download Page 91

Page: 91 / 187

ER-380 / ER-380M

Program Mode Programming

•

Program Mode Programming

Default Programming

•

All keyboard PLUs are nontaxable and open, without entry limits by default
status programming of "00000000".

•

All system options are set to

in default programming, unless otherwise noted.

Change only the options that will deviate from default programming. There is no
need to re-enter an option status of

, since

is its original setting.

•

All programming (unless otherwise noted) is done with the control lock in the

position. Each section details a specific area of register programming.

Descriptor Programming Methods

Descriptors are programmable for PLUs, function keys, groups, clerks and the logo/messages.
There is a method available to program descriptors, the program

Descriptor Code Method

Summary of Contents for ER-380M




























































































































































































Search results

Summary of Contents for ER-380M

Reviews:

Related manuals for ER-380M

Brands by name

Popular brands

Sam4s ER-380M, Operation And Program Manual

Search results

Summary of Contents for ER-380M

Reviews:

Related manuals for ER-380M

Brands by name

Popular brands