Sam4s ER-380M Operation And Program Manual Download Page 45

Page: 45 / 187

ER-380 / ER-380M

Operating Instructions

•

Promo

The

PROMO

key allows you to account for promotional items, as in "buy two, get one free".

Pressing this key will remove an item's cost from the sale, and the promo item will not be added
to the PLU sales total, but it is added to the item sales counter. If stock (inventory) reporting is
used, the item will be subtracted from inventory.

1. Register an item. For example, press

PLU

programmed with a price of $1.00

for price level 1.

2. Press

the

PROMO

key. The message

"PROMO" displays.

PROMO

3. Press

PLU

again. You cannot enter

an item that has not been already
registered in this transaction.

THANK-YOU

CALL AGAIN

DATE 01/15/2003 WED TIME 08:33

PLU1 $1.00

***PROMO***

PLU1
TOTAL              $0.00
CASH               $0.00
CLERK 1    No.000011   00001

Summary of Contents for ER-380M




























































































































































































Search results

Summary of Contents for ER-380M

Reviews:

Related manuals for ER-380M

Brands by name

Popular brands

Sam4s ER-380M, Operation And Program Manual

Search results

Summary of Contents for ER-380M

Reviews:

Related manuals for ER-380M

Brands by name

Popular brands