11
Change value or digit circulative from 0 to 9.
Shift normal or upright display mode.
►
：
Confirmation button:
Enter main menu.
Confirm the selected item.
▼&▲
：
Press downward and upward button simultaneously:
In measuring mode, turn off Bluetooth connection.
6.4.2.
Impact Device
This tester is equipped with internal D probe. The internal impact device can work as
standard probe when using impact body D, it can also work as special probe DL when
using impact body DL. Please set up Impact device to D while you are using probe D and
set up Impact device to DL while you are using probe DL.
Figure 6-6 Impact Device Selection
After selecting impact device, “Successfully” will be displayed on the screen, then return
to the Parameters menu.
Figure 6-7 Measuring mode with impact device D
Figure 6-8 Measuring mode with impact device DL
6.4.3.
Materials selection
Material to be tested is prior to hardness scale. In another word, the material must be
selected properly when you want to have any hardness scale except HLD.
Choose
Materials
from parameters menu and press
►
button to enter sub-menu. 11
materials will be showed in following three screens. Press
▼
or
▲
button to move among
the different materials. Then press
►
button to confirm it and return to parameters
menu.
Summary of Contents for HardyTest HARTIP 1800
Page 1: ...HARDNESS TESTER HardyTest HARTIP 1800 OPERATION MANUAL...
Page 2: ......
Page 11: ...9 6 2 Diagram of Operation Figure 6 2 Diagram of Operation...
Page 39: ......
